efnfast
05-05-2021, 09:38 PM
Noticed that my Jeep master cylinder was weeping around the gasket and no matter what I did it would refuse to seal in the back corner.
It seems the most common solution that people do is to RTV around the gasket, but I didn't like that idea.
I found an obscure post where somebody said they just put a second gasket underneath the first one and the extra pressure from the hold-down latches seals it up .... what do you know, double gasketing it works like a charm.
Just figured I'd post that after chasing this for two days.
It seems the most common solution that people do is to RTV around the gasket, but I didn't like that idea.
I found an obscure post where somebody said they just put a second gasket underneath the first one and the extra pressure from the hold-down latches seals it up .... what do you know, double gasketing it works like a charm.
Just figured I'd post that after chasing this for two days.