Simple Ron Francis, Russ Thompson IDIDIT question

[mdutton11]

Sorry guys - I have read so many different posts on this my brain is confused. Actually I think it is all wired correctly (pretty easy) but wanted to clarify a couple of things. I am using the momentary button for headlight dimmer / flasher and the IDIDIT relay.

1 The common wire out of Russ Thompson (black with white stripe and green dashes) - does this connect to the grey turn flasher from RF harness?

2 The two black wires from Russ Thompson - I assume one goes to the tan wire on IDIDIT - does the other go to ground? IDIDIT ground or RF ground or does it matter?

Thanks!

[edwardb]

1. Yes. That's the +12V from the RF panel for the turn signals. Goes to one side or the other depending on the position of the turn signal stalk.

2. For the intermittent switch, one wire goes to the Ididit tan wire. Other to ground. Since your Ididit black ground wire also has to go to ground, you could connect to either. As a famous person once told me, "ground is ground."

[mdutton11]

thanks -just wanted to double check