SBF motor mounts, poly or solid

[Joe Campbell]

I have some old Energy mounts that gave up the ghost, need a new set.

[Fman]

I have a set of the FFR energy mounts that were modified by Mike Forte to fit a dart block. Not sure if this is what you are looking for?

[7tvette]

I would recommend going to poly for a street used car. I just switched my BMW M3 track car to solid bushing and engine mounts...I feel every pebble on the road.

Troy

[Joe Campbell]

I do have the Dart block, I'll PM you...

[cob427sc]

I would also recommend the poly mounts for the street. I typically used the poly mounts but went with solid mounts on a 65 coupe build. I could feel every cylinder went it fired. Kinda neat though went you pul up next to somebody, blip the throttle and the whole car twists up!

[Mike DiGiorgio]

solid motor mounts are great on a track, but on a street car you will feel more than you may like. Also if you do install them its a good idea to start marking bolts/nuts, Vibrations from solid mounts love to shake parts loose.

[Joe Campbell]

Good points, I'll stick with a poly set.