Which shifter setup is this?

[richtersand]

Hi all, apologies for not knowing whose pic this is. I love the shifter setup. I believe this straight shifter is also the FFR recommended setup for TKO/TKX. Can anyone confirm that?

I found the shifter knob, but not the "stick" itself. Can someone please point me in the right direction? Thanks in advance!

https://thefactoryfiveforum.com/attachment.php?attachmentid=144084&d=1615408880

[Blitzboy54]

Looks like a Hurst to me. This isn't it but I'm guessing it won't take long to find it if you dig

https://www.holley.com/products/drivetrain/shifters_components_and_accessories/shifter_sticks/parts/5388550

This one is close

https://www.holley.com/products/drivetrain/shifters_components_and_accessories/shifter_sticks/parts/5387201

You would need a TKO mid shift or put an S10 tail on a T5

[Jim1855]

Probably a mid-shift position. Looks like a Hurst shift lever.
Jim

[65 Cobra Dude]

Mike Forte sells a shift lever just like that but says Fortes on it,

Henry

[Al_C]

I agree that it is the Hurst, but it looks more like the 5387301. That's the same shifter I have, only mine is tilted back and this one is tilted forward. It also looks like he has the mid-shift in place. If this is a TKO, you need the mid-shift kit for that. Forte sells them.

[coyobra]

Hi all, apologies for not knowing whose pic this is. I love the shifter setup. I believe this straight shifter is also the FFR recommended setup for TKO/TKX. Can anyone confirm that?

I found the shifter knob, but not the "stick" itself. Can someone please point me in the right direction? Thanks in advance!

https://thefactoryfiveforum.com/attachment.php?attachmentid=144084&d=1615408880

This looks like what I have. My setup is midshift attached to a Tremec TKO600 tranny. Hurst shifter, part# 5387201. It's 6.380 inches and angles back 10 degrees. Looks straight up and down with the shift boot on. You will probably need 2 8MM insert bushings for the shifter to attach to the midshift tower transmission "lever". Mike Forte supplies the 8MM bushings for Hurst shifters and the midshift tower.

[richtersand]

Thanks everyone, appreciate the feedback!! I actually caught Forte just in time to mod the transmission to mid shift. I’ll order the parts tonight.