almost ready to order my coyote and trans - check my list please :)

[toadster]

Going to buy from Mike Forte - here's the list of parts that I'm focused on - am I missing anything?



1 M-6007-M50
M-6007-M50C 2018 GEN III ENGINE


1 M-6017-M50
M-6017-M50B GEN III COYOTE ECU


1 M-8600-M50
M-8600-M50BALT ALT KIT


1 M-9680-M50
GEN III COYOTE ENGINE COVER KIT


1 TCET17765
TKX .68 FORD TRANSMISSION



1 COY BELLHOUSING, BLOCKPLATE & BOLT



1 FORK COY CLUTCH FORK W/ PIVOT



1 T/O B T/O B 614014 FORD LATE USA TIMKEN



1 BOLT KIT & FLYWHEEL, CLUTCH BOLTS & PILOT


1 M-6375
M-6375-G46A 8 BOLT FLYWHEEL


1 RAM COY
RAM 11" X 26 CLUTCH KIT


1 MINI
COYOTE MINI STARTER


1 COY OIL
COYOTE OIL FILTER NIPPLE


1 ENGINE
ENGINE LIFT PLATE COY ON LOAN


LABOR-A
ASSEMBLE TO TURNKEY & CRATE


COY
AIR K&N FILTER AIR INLET KIT



I'm on the fence about the engine cover kit - but will probably develop something from it...

the Tremec TKX is $200 more than the TK0-600 but that's par for the course :)

[nuhale]

Are you running power steering? I would get a hydro setup if so. Also consider a QuickTime bell over the alum (assuming that’s what is listed).

[edwardb]

Don't see the oil pan and pickup needed to replace the stock pan that's too low. Moroso is what I've used. For the Gen 3, you'll also need a BR3Z-6710-A Oil pan gasket/windage tray and bolts. Also you'll need a F3LY-6C070-A flywheel access hole plug. I personally prefer the lighter M-6375-M50 flywheel and the M-7560-T46 (Centerforce) clutch. But those are personal choices and I suspect Mike has his own opinion about what he's providing. Also curious about the starter. I've seen his packages not use the Motorcraft M-11000-C50 piece.

[toadster]

I'm pretty sure he does the oilpan already since it's turnkey ready, he assembles it all and ships in one huge crate... but I'll check! :)
I found a new link on his site that shows the Moroso oilpan is an addon (see below)

and yes, will upgrade to the steel bellhousing - you can't say "I wish I did that" after your ankles are blown away... better safe than sorry!

I have the KRC power steering setup already from FFR so that's done

I can check on the lighter flywheel, and Centerforce clutch - I prefer those myself



Ford Performance M-6007-M50C 2018 Gen 3 Coyote6
TKX Transmission (3 Gear Ratios Available)
M-6017-M50B Gen 3 Coyote ECU
M-8600-M50BALT Alternator Kit
Gen 3 Coyote Engine Cover Kit -Optional
Aluminum Bellhousing, Block-Plate, & Bolts
Clutch Fork/ Proper Pivot Ball
Timken Throw Out Bearing
Coyote Mini Starter
Coyote Oil Filter Nipple
Stock Flywheel -Optional Billet Flywheel Available-Lightweight Option Available
Ram Clutch 11″ 26 Spline, Optional Centerforce or Multi-Disc
-Optional Moroso Oil Pan and Pickup, Bolt Kit, Gasket, and Sensor Plug $632
-Optional K&N Cone Filter with Air Inlet and Adapters $154
Engine Lift Plate $95 (Refundable Upon Return with engine shipping brackets)
-Assembly Available Upon Request

I need to add the hydraulic clutch - missed that previously!

Thanks guys!

[toadster]

bottomed out on this for my order



Engine & Transmission Plans: Forte's Coyote Engine Package (https://mobiletekkdemo.com/fp/product/5-0l-460hp-gen-3-coyote-engine-package/)


M-6017-M50B GEN III COYOTE ECU (https://performanceparts.ford.com/part/M-6017-M50B)
M-8600-M50BALT ALT KIT (https://amzn.to/312emWC)
GEN III COYOTE ENGINE COVER KIT (https://performanceparts.ford.com/part/M-9680-M50B)
Tremec TKX TCET17765 FORD TKX 2.87 / .68 (https://fortesparts.com/product/tremec-tkx-manual-transmission-tcet17765/)
QT RM-6080 4.6 COY TKX (https://amzn.to/39iRTt5)
FORK COY CLUTCH FORK W/ PIVOT
T/O B 614014 FORD LATE USA TIMKEN (https://amzn.to/3vTVbg3)
BOLT KIT & FLYWHEEL, CLUTCH BOLTS & PILOT
ACT COY 164T COYOTE FLYWHEEL 8 BOLT
M-7560-T46 11" 26 SPL 4.6 CENTERFORCE
MINI COYOTE MINI STARTER N/C (https://amzn.to/3eZYxrv)
COYOTE OIL FILTER NIPPLE (https://fortesparts.com/product/454/)
OPTIONAL OPTIONAL PARTS & LABOR BELOW
MOR COY GEN III PAN & PICKUP WITH GASKETS & BOLTS
EXT HYD EXT HYD KIT MK IV MINUS MASTER
LABOR-A ASSEMBLE TO TURNKEY & CRATE
COY AIR K&N FILTER AIR INLET KIT
ENGINE ENGINE LIFT PLATE COY REFUNDABLE $95.00


+ FREIGHT costs