Gen 3 power module

[Cincy123]

Getting things together for the upcoming 65 Coupe build (hopefully to be delivered end of March). I have received the Ford Performance power module (Gen 3 Coyote with T56 ect). I was a little surprised there were no assembly instructions which would also be helpful in knowing what to torque the various bolts ect. I looked on the Ford Performance website for any PDF downloads and no luck. Does anyone have a link that will be helpful in assembling the new flywheel, clutch, bell housing ect?
Thanks so much!

[michael everson]

https://www.factoryfive.com/wp-content/uploads/2021/01/Coyote-Gen-3-Fitment-roadster-rev-1E.pdf

I would start at the above link. If that doesn't help you can google each torque setting etc.
Mike

[edwardb]

Agree with Mike. The Factory Five Gen 3 Coyote instructions have the torque values you're looking for and should be a source of information for your installation. Although I didn't get the power module package from Ford Performance, I do have those exact components in my Gen 3 Coupe build. Super happy with the setup. Lots of details FWIW in my build thread. Link in my sig line below.

[Cincy123]

Thanks Mike that is a big help! Just trying to get everything thought out prior to the arrival of my complete kit from FF.

[Cincy123]

As Always thanks Paul!