A/C Compressor and Power Steering Pump — Pulley Solution??

[Padawan]

All,
Anyone have a solution for a pulley setup with AC compressor and Power Steering Pump?

Ford 302

AC Compressor (Northracecars) 308 Sanden
Power Steering Pump (would prefer Saginaw)
3G Ford Alternator

One of the serpentine kit companies put together a package, they picked all the parts, after installation the Power Steering Pulley was hitting the steering column— their solution was to get rid of AC — not an option.

Thoughts?

[i.e.427]

Put a call in to Mike Forte at Forte's Parts Connection. Mike makes a lot of custom accessory brackets so he may be able to help.

https://fortesparts.com

Frank

[RBachman]

Here's how mine was set up by Mike.

141023141024
Put a call in to Mike Forte at Forte's Parts Connection. Mike makes a lot of custom accessory brackets so he may be able to help.

https://fortesparts.com

Frank

[Papa]

I know you can spec that setup with BluePrint and they use March accessory drive setups, or at least that's what mine came with. Have you looked at March?

https://marchperformance.com/ford/ford-small-block-289-302-531-windsor/pulley-and-bracket-kits.html

[Padawan]

I’ve reach out to March, sent pictures of the steering column... Waiting to hear back but they think it will fit but I’ll need to get a 7176 compressor (NorthRacecars comes with a 308 Sanden) Northracecars explained you can basically you can use any compressor

302 - Ultra-Mid Mount Kit

[Blitzboy54]

I've used these guys on my engine build. Simply cannot beat the price and they have a solution for everything. I got my pully's brackets, water pump and Saginaw PS pump from them

https://www.cvfracing.com/ford/ford-289-302-351w-small-block/all-inclusive-serpentine-systems/

[Padawan]

I've used these guys on my engine build. Simply cannot beat the price and they have a solution for everything. I got my pully's brackets, water pump and Saginaw PS pump from them

https://www.cvfracing.com/ford/ford-289-302-351w-small-block/all-inclusive-serpentine-systems/

I ended up with March Performance - they have the whole setup although I’m getting a new compressor. The pulley looks like it will give me an inch of clearance of the steering rack. This assuming your setup has both power steering and AC compressor.

Thanks for all the advice