TNcoupe
02-14-2011, 10:26 PM
While the last two spots of Rage were drying today I decided to pull the doors, finish the ends and make some door panels. Went to the Home Depot and picked up a couple of 2'x4' 1/4" MDF handy panels and made myself a pattern from cardboard. Made it a little large and slowly sanded away at a nice fit. Beveled the edges all the way around drilled and countersunk my screw holes and cut my door handle hole out. Then covered in 3M Carbon Fiber vinyl to match my dash and switch panel. Looks kinda plain right now but Im thinking of trying to find a small armrest to go on it.
http://www.ffcars.com/photopost/data/500/medium/pattern.jpg
http://www.ffcars.com/photopost/data/500/medium/panel.jpg
http://www.ffcars.com/photopost/data/500/medium/CF_panel.jpg
http://www.ffcars.com/photopost/data/500/medium/pattern.jpg
http://www.ffcars.com/photopost/data/500/medium/panel.jpg
http://www.ffcars.com/photopost/data/500/medium/CF_panel.jpg