Fuel tank Mk IV

[Kodiak]

Any modifications to install the Pro-M hanger in Mk IV ? And does anyone know the year the fuel tank is based on ? Thanks

[rich grsc]

The tank is based on the fox body mustang. I needed to slightly open up the top to get the Pro-M to fit. Not an issue on a new tank, a bit more complicated on a tank with fuel in it. :rolleyes:

[JohnK]

With a slight flexing of one of the lines (return, I think) I was able to get the Pro-M hanger into the tank without trimming the opening. It's a tight fit, but doable. You just need to be SUPER careful not to knick the wiring as you're working it in there, as all the edges are very sharp.

[TMartinLVNV]

Any modifications to install the Pro-M hanger in Mk IV ? And does anyone know the year the fuel tank is based on ? Thanks

One more experience from someone that was able to get the Pro-M in without modification to the unit or tank. It was a very tight fit. Yes, be careful of the wires like John said.