Tilton Throwout bearing

[Cincy123]

I was wondering if there are any comments using the Tilton 6000 throwout bearing on the T-56 Magnum? I used it on my 5 speed Tremec for the Cobra but noticed on the Tilton website you need to designate either a 2 bolt plate mount or pilot tube when ordering for the T-56. Also heard locally that the T-56 needs a McLeod TO bearing rather than a Tilton. Any direction would be greatly appreciated!

[edwardb]

My Coyote/T-56 Gen 3 Coupe uses a pilot tube mount Tilton 6000-Series Hydraulic Release Bearing 60-6104 with a Wilwood 260-10373 13/16 inch MC on the usual kit supplied Wilwood pedal box. Guess I should have found out it had to be a McLeod before I installed it and drove nearly 2,000 miles with it during the just completed first season. :rolleyes: It fits and works perfectly. Super happy with the feel and the significantly lower pedal pressure compared to the external slave setup I had in my previous Roadster.

https://thefactoryfiveforum.com/attachment.php?attachmentid=97947&d=1542890488