Rear Width

[schukar]

Could someone measure the distance between wheel mounting faces on the back end of an 818 for me?

[Hojo]

I’m slow. Not sure what wheel mounting faces are. I can’t just take the wheels off a stretch a tape across because the tranny is in the way. I can use my toe-in plates, measure that width and subtract the distance from the plate to the outside edge of the rotor. Happy to do that if it will help.

[schukar]

Maybe it would be easier to just measure the rear track width. If I also know your tire size and wheel offset, I can calculate what I need.

[Hojo]

I used my toe-in plates and measured back to the outside edge of the rotor. Outside edge of rotor to outside edge of rotor was 57 3/4 inches. I hope that helps. Let me know.