Headlight Switch

[Scott7644]

Can you please tell me the pin out of the headlight switch? What number on the switch corresponds to what wire? A diagram of the headlight switch would be great.

[Dan Golub]

5220


Here is the pin-out for the Headlight Switch

Thanks

Dan@FFR

[Scott7644]

Which connector is switch feed 2 on the RF harness?

1 and 5 are power feed - one of these comes from the fuse panel and the other from the ignition sw.
2 dash lights
4 parking lights
6 high / low beam switch

[Scott7644]

Connector 1 comes from the fuse panel. This is the one to tie into for the Russ Thompson turn signals.

[stroked 6t5]

Hello,
The headlight switch that comes with the MK4 looks almost identical to the one for my 1965 Mustang. I was wondering which pin should be used for interior lights and is it controled by turning the knob? Does this switch also have a rheostat to dim the dash lights? Many thanx.
Regards,
Andy

[Scott7644]

2 is the dash lights.
The extra connector by pin 1 is the Interior light ground..

[stroked 6t5]

Scott,
Does the knob turn to dim the dash light and then click at the end of the travel to turn on interior lights? Many thanx.
Regards,
Andy

[Scott7644]

That is my assumption. My car is at the painter now. That is one of the items to finish when he removes the body. I still need to install the interior lights on my '68 mustang also.