Log in

View Full Version : T5 with S10 Tail Finished Interior - Looking for Pictures


Padawan
12-08-2020, 12:34 PM
All,
Does anyone have any pictures using the T5 w/ S10 tail where the interior is finished?

Thanks,
Matt
David Hodgkins
12-08-2020, 02:01 PM
https://thefactoryfiveforum.com/attachment.php?attachmentid=91698&d=1534793496

:)
PG_Cobra
12-08-2020, 02:39 PM
with the offset Viper shifter
Joe Campbell
12-09-2020, 11:00 AM
https://sites.google.com/site/ffr3144rebuild/073110-buildfinished/Cockpit_073110.jpg
bobl
12-09-2020, 03:16 PM
Here's mine. It is a Hurst shifter for a T5 equipped Camaro(which fits the S10 tail shaft). It is the straight, flat stick. Just like the old "super shifter" I used in my drag car back in the 70's It's in neutral in the photo so you can see it sticks straight up. I heated the base and bent it until the angle was exactly what I wanted. You also can shorten the stick if you so desire. it shifts really, really good.

Bob
EZ$
12-09-2020, 05:10 PM
Just completed my interior. Here's a couple of views.
https://live.staticflickr.com/65535/50700247451_69cd1a25b2_z.jpg (https://flic.kr/p/2kfd2cr)20201208_172000 (https://flic.kr/p/2kfd2cr) by Rick Paul (https://www.flickr.com/photos/156322842@N02/), on Flickr
https://live.staticflickr.com/65535/50700247106_58523d08c1_z.jpg (https://flic.kr/p/2kfd26u)20201208_171929 (https://flic.kr/p/2kfd26u) by Rick Paul (https://www.flickr.com/photos/156322842@N02/), on Flickr
Was not happy with the shift and brake handle boots that I found, so I made my own. Used the same vinyl as the dash and the trans tunnel cover.
Padawan
12-09-2020, 10:23 PM
Just completed my interior. Here's a couple of views.
https://live.staticflickr.com/65535/50700247451_69cd1a25b2_z.jpg (https://flic.kr/p/2kfd2cr)20201208_172000 (https://flic.kr/p/2kfd2cr) by Rick Paul (https://www.flickr.com/photos/156322842@N02/), on Flickr
https://live.staticflickr.com/65535/50700247106_58523d08c1_z.jpg (https://flic.kr/p/2kfd26u)20201208_171929 (https://flic.kr/p/2kfd26u) by Rick Paul (https://www.flickr.com/photos/156322842@N02/), on Flickr
Was not happy with the shift and brake handle boots that I found, so I made my own. Used the same vinyl as the dash and the trans tunnel cover.

Thanks for the prompt replies...