A/C Compressor oil

[Kempo]

Hi guys,

Need some help here. I got a new Delphi A/C compressor for my build. I forgot to check for oil before installing it. Any of you guys know if they come with oil on them or not?

Thanks

[claybags]

Some do, some don't!!! Ask me how I know!! Mine didn't which, like you, I discovered AFTER the engine was in. I removed the header, undid the comp. mtg bolts, pulled the comp out from the mounts so I had access to the fill plug. Made up a dipstick and checked for oil. DRY!!! rigged up some tubing and a funnel, and filled it with the correct amt. of oil plus leak-check dye, re-assembled. A real PITA!!! Kicked myself for forgetting to check it after it arrived, so much easier to do on the bench.
HTH.
Cheers, Jeff
PS...Don't know why SSP is such a PITA to deal with, they're getting a really bad rep.

[Kempo]

[QUOTE=claybags;36303]Some do, some don't!!! Ask me how I know!! Mine didn't which, like you, I discovered AFTER the engine was in. I removed the header, undid the comp. mtg bolts, pulled the comp out from the mounts so I had access to the fill plug. Made up a dipstick and checked for oil. DRY!!! rigged up some tubing and a funnel, and filled it with the correct amt. of oil plus leak-check dye, re-assembled. A real PITA!!! Kicked myself for forgetting to check it after it arrived, so much easier to do on the bench.
HTH.
Cheers, Jeff
PS...Don't know why SSP is such a PITA to deal with, they're getting a really bad rep.[/QUOTE

Thanks for the reply Jeff. Just got and email from the place I ordered it and he confirmed that mine comes dry.

About SSP, over the phone Steve sounds like a real pleasure to do business with. Very accommodating to any custom requests on the harnesses but in the end there was always a new excuse for not being done with it. I did have a horrible experience with them. Did you order something from them?

[claybags]

Yeah, I got a semi custon engine harness plus a re-man ECM. Took a while, but I am in AZ . Harness was very nice, ECM..well, kept getting a code that my 4 wheel dr P/N was screwed up, so I don't know what it was out of. Then started hearing stuff about him among the local tuners, so I went somewhere else. Too bad.
Hey, I was anchored out in the bay there a few years ago, I shoulda' looked you up had I known LOL.
Cheers, Jeff

[Kempo]

Hey, I was anchored out in the bay there a few years ago, I shoulda' looked you up had I known LOL.
Cheers, Jeff

Where at San Juan or here at Cabo Rojo? If you ever make it back down here shoot me a PM.

[claybags]

Cabo Rojo. Hung out for a few days before crossing the Mona Passage to the DR. Fun time!!
Cheers, Jeff

[claybags]

More precisely...Boqueron
Jeff

[Kempo]

More precisely...Boqueron
Jeff

I live about ten minutes away from Boqueron. Are you one of those guys that come all the way from the states on a sail boat? Did you by any chance stopped at Mona island on your way to the DR? I'm glad you had a fun time here.

[claybags]

Well, we were on our way to Florida from the Meditteranean after spending 4 years in Europe. Now with a GTM, I fear my sailing days are at an end! LOL

Cheers, Jeff

[Kempo]

Well, we were on our way to Florida from the Meditteranean after spending 4 years in Europe. Now with a GTM, I fear my sailing days are at an end! LOL

Cheers, Jeff

That is one LOOOOOOOOOOOONG sailing trip.

[Kempo]

I removed the compressor last night and took it to the shop of a friend to add the required amount of oil. I always like to see the positive side of things, even in situations like this one where I forgot to add the oil before the install. I had to pull the compressor to add the oil but the good thing was that I was able to read the serial number of the engine which is hidden behind the compressor. I will need that number when the time to register the car arrives. I was also able to solve another problem I had. The connector on the compressor is located at about 8 o'clock on the stock C5 compressor. This created a clearance issue with the chassis. As soon as the engine would have moved on hard acceleration or deceleration it would have broken that connector from the compressor clutch. I had even marked the chassis to modify it to gain some clearance. After pulling the compressor I noticed that there is another notch at about 2 o'clock on it that can accommodate the clutch connector. So, I asked my friend to pull out the clutch and relocate the connector in that notch. No more clearance issue there.

Before

https://byfiles.storage.live.com/y1pL_emAPWHYVUDI7y5H7Xzncv4dqnDr_89sS0O7GGAaCchtQV vqXZGOtDlIKs1Uez6ZPOdkZocUpQ/IMG_1085.JPG?psid=1

After relocating the connector

https://by1.storage.live.com/items/1AC6F2642272029D!785:Scaled1024/IMG_1184.JPG?psid=1&ck=0&ex=720

https://by1.storage.live.com/items/1AC6F2642272029D!786:Scaled1024/IMG_1185.JPG?psid=1&ck=0&ex=720

https://by1.storage.live.com/items/1AC6F2642272029D!787:Scaled1024/IMG_1186.JPG?psid=1&ck=0&ex=720

https://by1.storage.live.com/items/1AC6F2642272029D!789:Scaled1024/IMG_1188.JPG?psid=1&ck=0&ex=720

[The Stig]

I removed the compressor last night and took it to the shop of a friend to add the required amount of oil. I always like to see the positive side of things, even in situations like this one where I forgot to add the oil before the install. I had to pull the compressor to add the oil but the good thing was that I was able to read the serial number of the engine which is hidden behind the compressor. I will need that number when the time to register the car arrives.



That's where it is... I knew that I had seen it. The person that I spoke to said that it was on the front of the block on the passenger side, just below the head. I understood that to mean somewhere around the water pump. But then I vaguely remembered seeing a lazer etched serial number on the side of the block, but couldn't remember where.

That will sure help some other people here! Thanks for posting this!

[Joe Mush]

Kempo, How much A/C Compressor oil did you add ?

Joe

[Kempo]

Joe,

7 oz were addded to the compressor. There will be another 3 that will be added with the refrigerant.

[Joe Mush]

Thanks Kempo