View Full Version : Cobra Valve Covers for a 5.0 FI
Xkuzme1
12-02-2020, 08:23 AM
Does anyone know where I can find a set of Valve Covers that say COBRA on them that will fit a Fuel Injected 5.0 out of a 93 Fox body?
Most will not fit because of the stock intake. The oil filler tube on the RH side should be on the front side of the engine. I can find them all day long for the oil filler on the back side, but the oil filler tube won’t clearance the intake.
Thanks guys.
138641
davekp
12-02-2020, 08:29 AM
Just change filler cap.
Xkuzme1
12-02-2020, 09:05 AM
It makes the filler cap inaccessible.
138646
steno
12-02-2020, 11:56 AM
EFI Cobra valve covers are all over the place! I just prefer the factory covers without all the lettering on them!
davekp
12-02-2020, 05:29 PM
It makes the filler cap inaccessible.
138646
Fill on the drivers side. The passenger side is plumbed to supply clean air to the crankcase.
davekp
12-02-2020, 05:35 PM
138654138655
JohnnyB
12-02-2020, 07:50 PM
Check with Mike Forte or Gordon Levy and I’m betting they can hook you up. I went with the black wrinkle finish Ford Racing part number M-6000-C302 but that was years ago. It looks like it’s still available if you do some searching. The polished version, part number M-6000-D302 still appears to be widely available.
138669
138668
mburger
12-02-2020, 08:07 PM
There is a spacer that goes between the upper and lower intake to raise the upper a 1/2” or 1” or whatever you need.
Xkuzme1
12-02-2020, 08:39 PM
Thanks guys. Perfect!
i.e.427
12-02-2020, 09:30 PM
I've got a set of the Ford Racing cast ones for EFI.
https://thefactoryfiveforum.com/attachment.php?attachmentid=138675&d=1606962574
I think I got mine from late model restoration.
AC Bill
12-03-2020, 02:53 PM
Just my opinion, but with the 5.0 stock EFI motors, you can't really appreciate the Cobra valve covers. so much of them are hidden, with the intake, an the throttle body, etc. etc.
Different with a carb'd engine.