elismithc
10-26-2020, 10:11 AM
Got a brand new champ pan and pickup for first and second gen coyote motors. The pan will fit a 3rd gen coyote, but the pickup changed for the 3rd gen. Bought it since the moroso one was indefinitely on back order, but it did not fit with the moroso pickup (For 3rd gen coyote). Low and behold, moroso pan came back in stock, so bought that instead of modifying this one.
*note: I did remove one of the nuts that holds on the windage tray and the weld left a hole on the... shelf piece? (not a hole in the pan itself) you can see the missing stud on the middle right, and I made the notch for the pickup slightly wider in the baffled area, in an attempt to get the moroso pickup to work, but turns out its just too shallow on the front half.
pan and pickup was $506 plus shipping originally. Would like to get $380 plus shipping.
136760
*note: I did remove one of the nuts that holds on the windage tray and the weld left a hole on the... shelf piece? (not a hole in the pan itself) you can see the missing stud on the middle right, and I made the notch for the pickup slightly wider in the baffled area, in an attempt to get the moroso pickup to work, but turns out its just too shallow on the front half.
pan and pickup was $506 plus shipping originally. Would like to get $380 plus shipping.
136760