Steering Wheel Need a smaller option.

[jtro]

Exactly what the title says i have the original steering wheel would like to put probably a 13 inch wheel on her! To give me a little more room. I have the Russ Thompson Turn Signal adapter any ideas?

Thanks
jim

[jtro]

Preferably something that bolts right up.

[JohnK]

I went with a 330mm Nardi wood steering wheel. Not a direct bolt-up unless you also go with the NRG quick release mod that several (including me) have done. Then the Nardi, Momo, and Sparco wheels bolt right up to the NRG hub.

I have a few posts in my build thread about the whole setup, but here's the post (https://thefactoryfiveforum.com/showthread.php?31167-Greek-Guys-Garage-Roadster-Build-9509-(fuel-system-is-complete-and-pressure-tested)&p=417029&viewfull=1#post417029) with the finished wheel with QR.

[Walt]

I changed to the leather covered one from finish line, it's smaller, a smaller wheel makes it harder to turn if you don't have power steering.

[PG_Cobra]

I went with a 12" custom wheel from Moto Lita. They made it with the Cobra hole pattern. They'll make a custom variant of their standard products, just contact them in the UK via their website.

136731