Box 20 Part Identification

[TheMole]

Got my kit and tearing through the boxes. Lots and lots of stuff! Some I can understand, some I have to look up. Ended up with 4 parts that I can't figure out...

I did not find part number 16861 (20418 Coyote computer Mount) or 16484 (coyote Fuse Panel Mount) so hopefully those are two of the four..

Any help so I can finish my inventory would be greatly appreciated!!

[nuhale]

when you open pic it changes orientation. The bigger piece on top is the coyote computer mount. The factory five emblem one is the PCB mount. The bottom piece is the coyote accelerator pedal mount and not sure what the one is with the square hole.

[FFinisher]

The one with the square hole is the carbon canister mount

[TheMole]

Thanks...I searched all over and couldn't get these figured...now on to the build!

[TheMole]

Thank You!

[jroberts]

when you open pic it changes orientation. The bigger piece on top is the coyote computer mount. The factory five emblem one is the PCB mount. The bottom piece is the coyote accelerator pedal mount and not sure what the one is with the square hole.

I am having the same problem. In the original posted picture, what is the bracket with the factory five logo? Nuhale called it a PCB mount. Is that the same as the 2015 Coyote Fuse Panel Mount?

Thank you for the help
Jeff

[Lidodrip]

I am having the same problem. In the original posted picture, what is the bracket with the factory five logo? Nuhale called it a PCB mount. Is that the same as the 2015 Coyote Fuse Panel Mount?

Thank you for the help
Jeff

Yes - although some choose to mount the Coyote fuse box to the firewall on the driver's side instead of using the bracket. If you look in the FFR Coyote instructions under "Wiring" it will show how the bracket is used.

James

[jroberts]

Thanks James!