View Full Version : WTB Looking for Bilstein front coil over shock
cha0s
10-14-2020, 11:01 AM
I am looking for a replacement Bilstein shock. long story short UPS lost one of my shocks and I need a replacement. Part# F4-BE3-A273-T0
136315
luvaz
10-14-2020, 02:54 PM
Hello Cha0s,
I have an extra Bilstein front coilover shock. It's Part# 0307 BE3 A273T1.
Let me know if you are interested.
Thanks,
Will
I found the part available here:
https://thmotorsports.com/998342-bilstein-shock-ford-cobra-factory-5-repl-frt
Edit: Just noticed it is out of stock.
These threads might also be interesting:
https://thefactoryfiveforum.com/showthread.php?13152-My-Front-Bilstein-Coilover-Failed
https://thefactoryfiveforum.com/showthread.php?34123-If-you-plan-on-selling-your-unfinished-car-a-little-bit-of-a-rant
cha0s
10-14-2020, 03:20 PM
Hello Cha0s,
I have an extra Bilstein front coilover shock. It's Part# 0307 BE3 A273T1.
Let me know if you are interested.
Thanks,
Will
Yes I am ..Let me makes sure that is the correct spring but i think it is. It should be 15" extended 10" compressed and 1 5/8 Diameter.
cha0s
10-14-2020, 03:38 PM
These threads might also be interesting:
https://thefactoryfiveforum.com/showthread.php?13152-My-Front-Bilstein-Coilover-Failed
https://thefactoryfiveforum.com/showthread.php?34123-If-you-plan-on-selling-your-unfinished-car-a-little-bit-of-a-rant
Thank you for the info. I am aware or the issue If they have had the upgrade done the shaft will be 14mm rather than 10mm. I sent mine off to Bilstein. They upgraded the one that actually made it there and sent it back. They were great to work with and stated they would upgrade another for me when I found a replacement.
I believe the A273T1 may actually be the updated version. I sent Bilstein an email to confirm.
Scottmillhouse
10-14-2020, 04:26 PM
I have two with Springs from my MK3 unused. Car has IRS so springs and shocks were all the same but Bilstein would not upgrade the rear under their agreement. Upgrade cost was more than cost of a new set of Konis from FFR so I mixed suspension but it appears to work very well. I did put the new Konis on the front and the updated Bilstein to rear.
cha0s
10-15-2020, 09:40 AM
I found some guys..Thanks for the help (y)