Front Wheel Hub Nut Size

[33fromSD]

I need to pick up a socket for the hub nut on the front wheel hub, anyone know the nut size off hand?

Thanks in advance

[RoadRacer]

I used 1 3/8, but 35mm is often quoted.

https://thefactoryfiveforum.com/showthread.php?24163-Roadracer-s-997-build&p=277945&viewfull=1#post277945

[progmgr1]

I bought a 36 mm socket at a local auto parts store for about $10. They are also available on line at Amazon, Jegs, etc. for about the same price. Keith HR #894

[33fromSD]

Thanks RoadRacer & progmgr1

[33fromSD]

1-3/8" did fit my hub nut so I order a 35 & 36mm socket from amazon

[Nigel Allen]

using a vernier, measure the width between opposing flats of the hexagonal nut, if it measures as 36mm, then you need a 36mm socket.

[RoadRacer]

1-3/8" did fit my hub nut so I order a 35 & 36mm socket from amazon

ugh that sucks. 1 3/8 is very close to 35mm.. but I've seen just as many report needing 36. ¯\_(ツ)_/¯

[j33ptj]

The hub nut is from the 89-97 Mustang, a search for that nut size showed up as 36mm

RJ

[33fromSD]

Thank you RJ...

I have a 35 & 36mm coming (should be here tomorrow) which the 35mm will not be wasted since the hub nut on my 55 F100 using a coil over IFS suspension kit from TCI are 35mm.

[33fromSD]

Just received the 35 & 36mm sockets....my hub nuts are definitely 36mm. :)

[RoadRacer]

Just received the 35 & 36mm sockets....my hub nuts are definitely 36mm. :)

lol, so weird, sorry! Mine was 1 3/8 or less than 35 :D there's my credibility gone out the window

[33fromSD]

lol, so weird, sorry! Mine was 1 3/8 or less than 35 :D there's my credibility gone out the window

Not at all, I appreciate any insight...I never mind picking up additional tools. I do a lot of vehicles and neighbors seems to borrow a lot of tools so I'm fine adding to the inventory of tools.