Just One More GTM Product....Vertical Crate ECU Mount

[VRaptor SpeedWorks, LLC]

If you've got a crate engine/ECU and are trying to plumb in the FFR dual Cold Air Intake kit, you might have noticed that trying to find a place to route the plumbing and place the filter on the RH side of the car gets pretty challenging. There's not a lot of area to work with there, and if you also happen to be running my aluminum Side Scoop Louvers, there's not a lot of room "down in the hole" for the air filter to live. I had just this set of circumstances on the car I'm working on, and realized the best place for the filter is just behind the ECU......only it would not fit there with the ECU mounted horizontally using Ian's custom ECU mounting plate (which I also offer......thanks Ian!). Anyway, this is what I ended up doing:



http://i78.photobucket.com/albums/j88/vacextar/596513083_photobucket_63520_.jpg



http://i78.photobucket.com/albums/j88/vacextar/596513083_photobucket_63525_.jpg



http://i78.photobucket.com/albums/j88/vacextar/596513083_photobucket_63524_.jpg



If you would like to order one for yourself, this ECU Bracket will be $23 plus shipping. You can contact me via email thru my website if you are interested in ordering. Thanks!