Another holley sniper wire question

[nick7405]

I am hooking up the sniper xflow. My fuel system is an intank pump with-
-8 line feeding and -6 return with am external fuel regulator. I want to keep my fuel pump running at all times.

So to the question, am I correct in thinking that I want to have RF power my fuel pump and to remove the holley sniper wiring i remove the relay in its entirety? This would consist of depinning the small blue wire (fuel pump output) and remove the additional wires from the relay; red wire from battery battery, big blue wire to fuel pump and pink wire.

Both the battery and pink wire are spliced and split into two so i would re-solder these as one whole wire.

Is This method of thinking is correct?

[michael everson]

That's what I did on a few of these builds. Why rewire the whole thing when it already there. Just remove the relay and cut and cap the wire not used.
Mike

[larryb2]

I am in the process of finishing my sniper and having trouble with the sniper powering the fuel pump. The relay is controlled by ground thru sniper. I see you are planning on running all the time. I guess I could bypass the blue ground control thru sniper, and just send to ground and pump will be on all the time. Any issues here??? thanks

Larry

[nick7405]

I wanted my fuel system strictly return style and not a hybrid of the two. I removed the part of the sniper wiring for the fuel pump anf am running it solely from the RF wiring