PDA

View Full Version : Bike Fenders?



ibpilot
08-16-2020, 08:14 AM
Are there any third party bike fenders that are available for the truck? I would think they would look great.

Pat Landymore
08-18-2020, 03:19 PM
Have you tried the search tool, but within the 33 Hot Rod forum instead of the Truck?

I understand the front suspension is the same on both kits...and I know I’ve seen a name other than Factory Five in a post there for front fenders...but I’m not certain that vendor supports the forum.

NAZ
08-18-2020, 04:14 PM
If you don't like the 33 Hot Rod bike fenders you can look at places like Speedway Motors or even trailer parts vendors and make your own. I made a set of "bike" fenders out of a Harley rear fender so that's another option if you are running skinny front tires. If there's a custom car or hot rod shop in your area they could make you some.

Davew70
08-19-2020, 08:52 AM
I am building a 33 Hot Rod and the bike fenders FFR has did not fit the wheels and tires I wanted to use. So, after doing a little shopping I did what NAZ suggested and used a pair of motorcycle (trike) fenders for my fronts. I purchased a pair of blanks from Oldy's Custom Composites (http://www.badassglass.us). They are fiberglass, come unpainted and can be cut to fit. They have quite a good selection. Also, they were good to work with.

HTH

Bakers35
08-19-2020, 01:05 PM
I am building a 33 Hot Rod and the bike fenders FFR has did not fit the wheels and tires I wanted to use. So, after doing a little shopping I did what NAZ suggested and used a pair of motorcycle (trike) fenders for my fronts. I purchased a pair of blanks from Oldy's Custom Composites (http://www.badassglass.us). They are fiberglass, come unpainted and can be cut to fit. They have quite a good selection. Also, they were good to work with.

HTH

I plan on doing the same,was going to to order 2 sets of front bicycle from the 33.

Did you mount front and back? and pictures?

Bakers35
09-01-2020, 01:38 PM
Have you tried the search tool, but within the 33 Hot Rod forum instead of the Truck?

I understand the front suspension is the same on both kits...and I know I’ve seen a name other than Factory Five in a post there for front fenders...but I’m not certain that vendor supports the forum.

I decide to order just 35 truck rear fenders (deleted the running boards and fronts) and added the 33 bicycle. Delivery on the kit not until late Nov though.