View Full Version : door seals
jwhit
07-21-2020, 10:32 AM
can anybody share pics on how the weather stripping was done around doors and what works and doesnt
thanks
John Dol
07-21-2020, 04:23 PM
https://thefactoryfiveforum.com/showthread.php?36139-1-4-scoop-block-off-windows-door-weather-stripping-and-gauge-calibration
Gen II but can't be too different.
Hope that helps,
John
jwhit
07-22-2020, 07:20 AM
https://thefactoryfiveforum.com/showthread.php?36139-1-4-scoop-block-off-windows-door-weather-stripping-and-gauge-calibration
Gen II but can't be too different.
Hope that helps,
John
thanks for the help was this seals that came with kit ?
John Dol
07-22-2020, 07:54 AM
I believe so but not 100% sure.
It’s a D seal with self sticking backing.
John
jwhit
07-22-2020, 09:54 AM
they sent 2 rolls of that
David Williamson
07-30-2020, 08:09 AM
I used a slightly thicker stick on "D" seal 1/2 by 1/2 inch mounted to the body and then the angle bulb seal around the window area.
132712
jwhit
07-30-2020, 10:57 AM
I used a slightly thicker stick on "D" seal 1/2 by 1/2 inch mounted to the body and then the angle bulb seal around the window area.
132712
that looks good
edwardb
07-30-2020, 11:14 AM
I used a slightly thicker stick on "D" seal 1/2 by 1/2 inch mounted to the body and then the angle bulb seal around the window area.
Same here. Except I put the D tube on the door rather than the body for the bottom and back. I also place it back away from the edge. It didn't seal on the edge. Discussed and pictured in my build thread. https://thefactoryfiveforum.com/showthread.php?26630-Edwardb%92s-Gen-3-Type-65-Coyote-Coupe-59-Build-Complete-and-Graduated&p=396406&viewfull=1#post396406
jwhit
07-31-2020, 07:38 AM
Same here. Except I put the D tube on the door rather than the body for the bottom and back. I also place it back away from the edge. It didn't seal on the edge. Discussed and pictured in my build thread. https://thefactoryfiveforum.com/showthread.php?26630-Edwardb%92s-Gen-3-Type-65-Coyote-Coupe-59-Build-Complete-and-Graduated&p=396406&viewfull=1#post396406
i used your pics as example to follow ,i did have to move mine closer to outside of doors.i dont think mine would seal if they were in as far as yours ,yours looks great