Air Jacks

[ayellow56]

Getting to the end of my build sheet for my 65R. Got a question ! Is anybody running air jacks on their coupes? If so what size are you using?. I don't see them anywhere on the option sheet. I just want to finalize this so a decision can be made as to whether have FF powdercoat the chassis or have it done at my shop if the air jack mounting has to be done by me. I had the Allstar system on my SLC and it was a breeze to service the car in the pits on in the shop. Thanks for your input. Steve.

[Jeff Kleiner]

It is not supported or offered by Factory Five so you would be on your own.

Jeff

[John Dol]

https://thefactoryfiveforum.com/showthread.php?34792-Logan-s-Gen-3-Coupe-R-Build&highlight=Air+jacks

Here’s a Coupe R with air jacks.

HTH

John

[Logan]

Yep, I have airjacks on my Coupe-R. Fabricated and welded all the mounting rings and brackets myself. Not a quick and easy job by any means, unless you have a CNC plasma table.

I just finished plumbing my system and building my onboard tank system with quick-couplers, and tested the jacks for the first time 2 weeks ago. They seem to work fine. Rear lifts first and lowers last due to the chassis being front heavy (at least right now). Hopefully I can corner weight the car closer to 50/50 which will help some. It will probably never lift perfectly level, but that's not really a problem as you know. I will record a second lift at some point and put the video on YouTube to share here.