Ponymedic
07-19-2020, 03:47 PM
I have a bad cooling fan sender. I have it installed in the thermostat housing and it dosent ground even when the temp gets up to 120c. If I ground the line the fan comes on
Anyone know what sender it is?
Railroad
07-20-2020, 08:44 AM
Look these over and see what temp range, thread size and connector you need. good luck,
https://www.summitracing.com/search/part-type/coolant-temperature-sensors
You might want to check the sensor is grounding through the threads. I have heard that too much tape or sealer might prevent the sensor from grounding to the engine. If you have a 2 wire sensor, it does not apply.