PDA

View Full Version : Phil M.’s Ultimate Street Cruiser Truck!



Dave Smith
07-17-2020, 09:53 AM
https://www.factoryfive.com/wp-content/uploads/2020/07/phil-m-truck-gallery-folio.jpg

Customer Phil M.’s ’35 Hot Rod Truck built by Ron Everitt in Massachusetts is the ultimate street cruiser Truck. Built with a modern 5.0L Coyote, full fenders, electric steering, A/C, power windows, wood bed, wire wheels, and a custom tan interior.

https://www.factoryfive.com/wp-content/uploads/2020/07/H41A0619-1.jpg

Phil previously drove a Factory Five Mk2 Roadster for many years, and decided to build a Truck with his friend Ron Everitt. Phil’s Truck is period-correct on the outside with every modern convenience on the inside. This Truck is super streetable with air conditioning, power windows, and power steering… but with a 460 HP Ford Coyote engine this truck will flat-out spank Porsches and Corvettes.

Click here to view the full photo gallery. (https://www.factoryfive.com/galleries/35-hot-rod-truck/customer-phil-m-s-35-hot-rod-truck/) Photos taken by Dino Petrocelli.

cob427sc
07-17-2020, 10:15 AM
Let me be the first of many to say "Beautiful". Extremely well done.

David Hodgkins
07-17-2020, 11:11 AM
Gorgeous trunk!

first time builder
07-17-2020, 11:17 AM
Wow !

wallace18
07-17-2020, 01:31 PM
Super job!:cool:

FF33rod
07-17-2020, 03:49 PM
Wow indeed! Fantastic

KDubU
07-18-2020, 05:39 AM
Very nice indeed!

RuffShod
07-20-2020, 07:06 AM
Pretty!

VIRGIN MIKE
07-24-2020, 11:42 AM
I am inspired; reminds me of why I undertook this project; thank you and congratulations

bnelson
07-24-2020, 10:02 PM
Man... Somebody did some serious priming and blocking on that thing! Beautiful!

Now..... if FFR would just fix the friggin radiator shroud so its flat with the hood!

rponfick
07-25-2020, 11:17 AM
I used 1/4" flat rubber stock all the way around top of shroud. Fits pretty good in front, now rear is another matter.
Ralph