David Williamson
06-25-2020, 07:57 AM
Well I guess it is time to Graduate my Gen 3 coupe #16, it has been on the road since Fall 2018, Painted over the Winter/Spring of 2019 and in now mostly complete. I still have a list of stuff to do but we are driving it and enjoying it. My wife and I took it out to a park near our house and she took a lot of pictures (only going to post a few) with her Nikon D7200 using 50mm and 55-300mm lenses.
The car was built with all new parts starting with the "Canadian" kit and completion parts. I did a build post that details the car. My plan was an old school look but not a race car so the engine is a Dart 363 with Fitech injection, the transmission is a TKO600 it has IRS, power steering and a full interior.
I had a flat bed truck pick up the big crate at the warehouse in Edmonton
130480
we started pulling the crate apart and 3 of us lifted the body/frame onto the jack stands in the garage
130481
a few months later the crate of completion parts arrived
130482
and here are some pictures of the final result.
130483
130484
130485
130486
130487
130488
130489
I will continue with a couple more pictures on the next post
David W
The car was built with all new parts starting with the "Canadian" kit and completion parts. I did a build post that details the car. My plan was an old school look but not a race car so the engine is a Dart 363 with Fitech injection, the transmission is a TKO600 it has IRS, power steering and a full interior.
I had a flat bed truck pick up the big crate at the warehouse in Edmonton
130480
we started pulling the crate apart and 3 of us lifted the body/frame onto the jack stands in the garage
130481
a few months later the crate of completion parts arrived
130482
and here are some pictures of the final result.
130483
130484
130485
130486
130487
130488
130489
I will continue with a couple more pictures on the next post
David W