Anyone using HEIDT PS-101 Powe steeinng adjustment valve.

[mcwho]

My crate engine came with a GM power steering pump, because of the large pressure I needed to educe the pressure to decease the assist. Tried a couple valves that went into the pump with no success. Finally installed the HEIDT PS-101.

Its installed but need advice on which way to turn the knob to decease the power assist.

I didn't see any procedure. I have been diving the car for 2 yeas with way too much assist.

I set it at about half of its setting.

[davekp]

CCW to decrease. I'm running 3-1/2 turns out.

[mcwho]

Thanks for the tip, noticed you are about an hour from me.

Bob

[mburger]

Is this what you are looking for?
https://www.heidts.com/inst/in-053.pdf

[davekp]

Yes,
Seems to be quite a few Cobra owners in central Florida.

[BB767]

My crate engine came with a GM power steering pump, because of the large pressure I needed to educe the pressure to decease the assist. Tried a couple valves that went into the pump with no success. Finally installed the HEIDT PS-101.

Its installed but need advice on which way to turn the knob to decease the power assist.



I didn't see any procedure. I have been diving the car for 2 yeas with way too much assist.

I set it at about half of its setting.

I am considering one of these. Will you please update us here on how you like it after you have a few miles on it? Also, what sealant did you use on the fittings? Thanks.