Cold Air Intake

[legend42]

Seeking options or advice on a cold air intake kit for a 2019 Coyote gen 3.

Thanks!

[edwardb]

How about what Factory Five recommends in their instructions: https://www.factoryfive.com/wp-content/uploads/2020/03/Coyote-Gen-3-Fitment-roadster-rev-1B.pdf.

There's also what they have in their Gen 2 instructions that will fit the Gen 3 as well.
SPE-9741 – 4” to 3.50” Reducer adapter
SPE-9771 - 4” hose coupling
SPE-9799 - 4” 90 ° intake tube – Requires putting fitting in hose for PCV hose
SPE-9705 - Mass Air Sensor filter adapter
KNN-RU-5149 – 4” ID x 6.50” long Air Filter

There's another MAF adapter that some have mentioned. In this thread: https://thefactoryfiveforum.com/showthread.php?35767-Treadstone-3-5-quot-MAF-adapter-MAPHL35&p=409464#post409464.

[legend42]

Thanks Paul. I will probably go with FFR kit, just was curious about nicer looking bling kits I have seen in your build and others.

[edwardb]

Thanks Paul. I will probably go with FFR kit, just was curious about nicer looking bling kits I have seen in your build and others.

My 20th Anniversary Roadster has the Spectre parts. The Gen 3 Coupe the Treadstone parts. The ones referenced above. No added bling there.

[Railroad]

I think you need the MAF meter at least 10" from the throttle body. The 90* curve helps. I think Ford list a distance in their instructions. Doing stuff from memory.