Lemans Gas Cap Install

[D02G]

Just curious if most have used the screws that go into the fiberglass or went with nuts and bolts through the fiberglass?

[Ducky2009]

I used the screws into the body. Holds fine.

[phileas_fogg]

I went with through-bolts. I used #10-32 oval heads (which required enlarging the holes in the cap's mounting ring), 'cuz that's the size I've used everywhere else in my car. There is one #10-24 oval head bolt provided with the cap to act as your grounding post (which I replaced with a -32).


John

[RJD]

I went with through-bolts. I used #10-32 oval heads (which required enlarging the holes in the cap's mounting ring), 'cuz that's the size I've used everywhere else in my car. There is one #10-24 oval head bolt provided with the cap to act as your grounding post (which I replaced with a -32).


John

Same as John

[GWL]

I went with the supplied screws. Remember, the entire unit is also held in place by the hose connection to the fill tube to the tank.

George

[Jeff Kleiner]

The screws into 'glass work fine.

Jeff

[rich grsc]

TIG it.:rolleyes:

[GoDadGo]

Allen Head Stainless Screws & Locking Nuts!

Gotto Over Engineer It, Don't You?

[BadAsp427]

Just used the provided screws and one bolt for the ground strap...

[cv2065]

10-32 oval head screws and nuts. Even painted the heads black to match the powder coat...:)