Oxygen sensors

[Grusks]

Just finishing off the wiring, plugged in the right hand side Oxygen sensor and fitted into the heater etc

Gone to the drivers side, no plug to connect to

Looking at the ford instructions, it shows 3 locations of plugs all coming from the left rear of engine but i only have 1 plug for the sensors


Ive a Crate Gen 2 Coyote engine in the 33

Where do i plug the drivers side into, ive even removed the intake in case tucked under there, checked every where, no spare plugs

[Svtfreak]

The driver side plug for the sensor comes from the front of the motor harness. Should be the harness leg that comes down by the factory alternator point. I think the oil pressure sensor plug is on the same leg. Drops down by oil filter. Kinda weird considering the other three ones all come out the same harness that goes along trans on passenger side.

[Grusks]

thanks mate thats brilliant, it was behind my engine mount, and i thought it was for a sump oil level switch as i couldn't see if it was plugged in


Again many thanks

[Svtfreak]

No problem, grusks. That’s what we all here for! To help each other.