Random Questions MKIV

[Alex_V]

I had made a short list of questions I ran into so far. Could anyone be kind to help:

- Coyote 2nd Gen Power pack came with two different O2 sensors. Different part numbers and wire colors. Does placement matter L/R?
- What does "IC Pump" wire on the Ricks harness go to?
- Part number or where to source rear adapters to make bodywork installation easier?
- Do side pipes need to be removed for bodywork assembly/disassembly?

Thanks,

Alex

[edwardb]

1. Only difference between the sensors is the cable length. You'll see right away which side goes where. The sensors themselves are the same.

2. IC = Intercooler. Used for forced induction setups. You can leave and tie out of the way. Or remove it. I removed mine.

3. No sure what you mean by this one.

4. Side pipes have to come off in order to get the body on and off. You want them out of the way all through the finish process.

[Alex_V]

Thanks, that makes sense now.

#3 was probably stated wrong on my part. I recall people doing "overrider" mod so you don't have to drop the tank to mount the rear jacks/bumpers. Was curious if these is a partt number for the threaded insert. For whatever reason I am struggling with understanding this one.

[Papa]

Thanks, that makes sense now.

#3 was probably stated wrong on my part. I recall people doing "overrider" mod so you don't have to drop the tank to mount the rear jacks/bumpers. Was curious if these is a partt number for the threaded insert. For whatever reason I am struggling with understanding this one.

That would be the "Coupler Mod". Any hardware store will have what is needed. Bolts, washers, couplers, nuts, and threaded rod.

https://thefactoryfiveforum.com/showthread.php?14243-Rear-quick-jack-mounting&highlight=coupler