Anyone relocate original factory brake master reservoir?

[grathke]

Hello all,

Wondering if anyone has relocated the brake master cylinder reservoir. I made a bracket and relocated it but am not happy with it. Wondering if anyone has done it and what does the bracket look like.

I've got an aftermarket one I can use just in case.


Thanks
Glenn

[AZPete]

Here's where I relocated the brake master but I don't think Mike Everson is supplying this remote reservoir kit anymore. This reservoir is mounted to a 3/4" bar riveted to the frame. I really didn't want it attached to the windshield in case I wanted to remove the windshield . . . which later I did twice.

https://thefactoryfiveforum.com/attachment.php?attachmentid=67234&d=1493866449

[grathke]

I should have explicitly stated or asked if anyone had relocated the original brake master cylinder reservoir. Sorry for the confusion.



Hello all,

Wondering if anyone has relocated the brake master cylinder reservoir. I made a bracket and relocated it but am not happy with it. Wondering if anyone has done it and what does the bracket look like.

I've got an aftermarket one I can use just in case.


Thanks
Glenn

[fletch]

I should have explicitly stated or asked if anyone had relocated the original brake master cylinder reservoir. Sorry for the confusion.

I am planning to do this, but haven't gotten it done yet. If/when I do, I'll post up pics. If you beat me to it, please do likewise!

[Bob_n_Cincy]

If I were to do my master cylinder again, I would make a 4" spacer and longer rod to move my the MC out from under the windshield cowl. This is mine now. 125949

[grathke]

Here is what I finally came up with, made out of lexan:

129229

129230





Hello all,

Wondering if anyone has relocated the brake master cylinder reservoir. I made a bracket and relocated it but am not happy with it. Wondering if anyone has done it and what does the bracket look like.

I've got an aftermarket one I can use just in case.


Thanks
Glenn