Time to Sell Some Parts

[RBachman]

I have a number of leftovers and duplicates I need to sell. These are all NEW. Does not include shipping. PM me if interested. I may not be capable of responding immediately because I'm still having trouble with intermittent access to this site (happens on all our computers, smart phones, lap tops, etc. so we're stuck). So you can also try my e-mail, richard @ richardbachman . com (no spaces.) Local pick-up is near Myrtle Beach, SC. Zip is 29576. Pricing is based on a combination of replacement costs and my wife demanding I clean out the left overs. Make some offers if these are not fair, I haven't put too much effort into guessing values.

Thanks!!



Power Steering Rack, Free (New, but needs seal replaced at pinion shaft)
Fuel Pick-Up, $35
125874
Coolant Overflow Tank, $40125876
Radiator Fill Tube w/20# Cap (also have 16# and 7# caps available), $20125877
7 Feet of Stainless Corrugated Radiator Hose, $40125873
E-Brake Cable Pair, $40125872
Foot type High-Low Beam Switch with Pigtail, $10125879
FFR Transmission Tunnel Cover, $40
FFR Dash with Cut Outs and Vinyl, $70
FFR Firewall panel, $30
F-Panels, Marked and Drilled and powder coated semi-gloss black, but Decided not to Use them, $40 pair
Throttle Cable, $15


Thanks again!

Rich B.

[R. Button]

FFR Transmission Tunnel Cover is this the aluminum cover for the transmission tunnel?

[ydousurf]

Hey Rich, I'll take the brake reservoir if you still have it? I can send a legit check to you for $50.00 and that should cover the shipping cost too. Let me know in PM if that works, address, etc...

Thanks,
Dj

[RBachman]

Yes it is. The one that comes with the complete kit.125890

[R. Button]

Thanks for the measurements - I'll check to see if it will fit a Mark I

[R. Button]

Sorry Rich it will not work on a Mark I
Length is good and the narrow end is good but the front wider end is too wide.
I would need to cut and re-bend it. I'll finish cleaning up the old one I have.

[RBachman]

Sorry Rich it will not work on a Mark I
Length is good and the narrow end is good but the front wider end is too wide.
I would need to cut and re-bend it. I'll finish cleaning up the old one I have.

Thanks anyway! I put the measurements there exactly for that reason. Glad it helped you keep from buying something won't fit, I also hate buying stuff that I can't use. LOL!

[dccobra]

PM sent on mirror

[RBachman]

Dean, I got your PM, but the site will not let me respond...more bugs in the FFR forums I guess. Send me an e-mail and I'll get it out to you. Richard @ richardbachman . com (no spaces.)

[Bowbrother]

Seats still available?

[RBachman]

Seats still available?
Please see PM, Thanks!

[ThreeSpore]

Hi! will the e-brake cables fit for an IRS setup?

[RBachman]

Sorry so long to respond. The site is very finicky about letting me log in. That's why I've put me email up and asked to be contacted that way due to the unreliable nature of the forums. But yes. They will work with the IRS because that's what I ordered and these came with the kit. You can better reach me by my email, richard @ richardbachman .com (Without spaces)

Thanks!!!!

[JimLev]

I've emailed and sent you a PM 3 days ago. Do you still have the seats??