Roof seams questions

[JimLev]

I've just ground the roof seams down, still need to pick out the loose chips out of all the cracks and holes.
I will then need to fill all of them with either USC fiberglass filled filler (which is basically bond) or just straight resin. I have both.
I'm thinking the resin would be better as it should be stronger.
This is the first time I've done any fiberglass work, what would you guys use?

[GoDadGo]

I've used Evercoat's Fibertech for issues like that.

This video may help, or not.

https://youtu.be/JwAErvc2tN4

I used the stuff on my doors where they meet the cowl and to fix the driver's door plus some fiberglass as overkill on the bottom of it.

https://youtu.be/6UK6K2jcwTU

Good Luck & Hope This Helps!

[FF33rod]

Still a newb myself but after some reading deduced that for small/shallow voids can use Rage (Gold) and for the bigger/deeper stuff used HSRF (EverGlass).

Steve

[JimLev]

Thanks for the info and links Steve. I did learn a few things I didn't know.
OK, back to the garage for me.


And thanks for the quick reply.