leave the RF Hot Rod steering harness or cut it out?

[Brian76]

Curious what you guys have done. Ron Francis instructions do not say to cut it out but I don't see why you can't to clean up the area behind the dash.

[MSumners]

I cut it out and shrink sleeved the ends of the wires to reduce clutter.

[Papa]

I left it in place and just zip tied it to the main harness bundle to keep it out of the way. I figured that any wiring I didn't modify would reduce the chance of causing a problem down the road. It really doesn't take up any "usable" space that's needed for anything else.

[wallace18]

I tape up the end and just zip tie in place also.

[phileas_fogg]

Like MSumners, I cut & shrink wrapped each wire. Then I tucked the stubs into the harness bundle.


John

[jrcuz]

Ditto same as John above.
JR

[dhuff]

i removed mine, BUT most of the wires were used for other purposes or made a convenient connection point.