Grkmf3
03-07-2020, 05:01 PM
Hi Gents,
Long time listener, First time caller
Sorry if this has been talked about already but I've been searching and cant find anything on it.
I picked up a fellow members Gen 3 Type 65 with a Gen 2 Coyote & control pack during last Christmas and i finally have it finished and ready to go to the DMV next week to inspect and vin it.
My only dilemma is that I'm not getting a tach reading on my Racepak Iq3 Street Dash since the control pack doesn't have a wire/output for it.
So i picked up the Autometer 9117 Tach Adapter but need to know which wire i tap into for the signal.
Any help would be very much appreciated.
Regards,
Dino 847-505-9364
Long time listener, First time caller
Sorry if this has been talked about already but I've been searching and cant find anything on it.
I picked up a fellow members Gen 3 Type 65 with a Gen 2 Coyote & control pack during last Christmas and i finally have it finished and ready to go to the DMV next week to inspect and vin it.
My only dilemma is that I'm not getting a tach reading on my Racepak Iq3 Street Dash since the control pack doesn't have a wire/output for it.
So i picked up the Autometer 9117 Tach Adapter but need to know which wire i tap into for the signal.
Any help would be very much appreciated.
Regards,
Dino 847-505-9364