Slick Sand Question

[cfriedman67]

I've read all the body work threads so thank you for all the fellow builders that have posted them. They have been extremely helpful. Two questions regarding slick sand. First, once you spray the three coats do you need to sand it right after or can you wait until the following weekend? I wanted to make sure that if I needed to sand it afterwards that I have ample time to do that. Second question is how much do I need? Will two gallons be sufficient?

Thanks

[Jeff Kleiner]

You can wait and 2 gallons will do.

Jeff

[j.miller]

To add to that. You want at least 70* for four hours after priming. The higher the drying temp the better. 2.2-2.5 air cap and you can thin to 10% with acetone. Clean your equipment RIGHT AWAY ! If not "Concrete in a Cup"...da bat

[cfriedman67]

Jeff and Jeff, thank you.