MGee
02-04-2020, 08:21 PM
Good evening all
Im presently installing or rather attempting to install the gas pedal on my Mk 4 roadster kit. The bushing that serves as the pivot point for the pedal has a flat on it which corresponds with a flat on the pedal extension link mounting hole. The position of the flat does not allow the extension to be installed as shown in the manual. Is this possibly a manufacturing error?
Im presently installing or rather attempting to install the gas pedal on my Mk 4 roadster kit. The bushing that serves as the pivot point for the pedal has a flat on it which corresponds with a flat on the pedal extension link mounting hole. The position of the flat does not allow the extension to be installed as shown in the manual. Is this possibly a manufacturing error?