Coyote Gen 3 Transmission Mount

[walkerwde]

I installed my Coyote Gen 3 engine today but the supplied transmission mount appears to small. I’m not sure if they sent me the wrong mount or if I’m doing something wrong. Any help would be appreciated. 121248121249

[rich grsc]

I thinks it just needs to be shimmed up. A few washers will work. Looks like it's an IRS rear suspension, if so the driveshaft should be almost level.

[FFinisher]

There should be spacers with the mount extension. IT should be raised about 3/4 of an inch.