delamination

[Furrman]

what is the best way to fix delam's? I have several areas were there is just gel coat, then 1/8" air gap ,then fiberglass. should I just pour resin in there? this is especially prevalent around the windows. some of the glass mat goes from one side of the door to the other, across the opening. I have the same problem on the top, little bumps that pop into hollow spots. has anybody else experienced this?

[bnelson]

what is the best way to fix delam's? I have several areas were there is just gel coat, then 1/8" air gap ,then fiberglass. should I just pour resin in there? this is especially prevalent around the windows. some of the glass mat goes from one side of the door to the other, across the opening. I have the same problem on the top, little bumps that pop into hollow spots. has anybody else experienced this?

I had quite a few areas myself. I ground them out and filled with kitty Hair. If your not familiar its chopped glass mixed with resin in a can. Most auto supply stores have qt cans. The area on the windows sounds a little concerning. I think I would take some pictures and send to FFR and see what they say.
Bruce

[Furrman]

thanks Bruce, I guess I'll contact FFR. most area around the windows are only 1/16" some spots are less, maybe 1/32". I don't see how this could support the trim.