Clutch slave problem

[hogauto]

I am in the process of swapping a 347 to a coyote with a TKO500. I had Forte’s hydraulics clutch. I bought a new bracket from Forte but the clutch slave will not bolt up to the new bracket. The clutch slave measures 2 3/8 center to center on the mounting bracket. The new bracket is 2”. I spoke with him today and he said he couldn’t help because they discontinued the 2” slave. I’m willing to buy a new slave or the slave and bracket. Any ideas ?

[Garage Guy]

PM me with the specs and I can machine one for you most likely.

Richard

[edwardb]

I am in the process of swapping a 347 to a coyote with a TKO500. I had Forte’s hydraulics clutch. I bought a new bracket from Forte but the clutch slave will not bolt up to the new bracket. The clutch slave measures 2 3/8 center to center on the mounting bracket. The new bracket is 2”. I spoke with him today and he said he couldn’t help because they discontinued the 2” slave. I’m willing to buy a new slave or the slave and bracket. Any ideas ?

That's an odd response IMO. Right, the CNC slave cylinders used for many years are no longer made. CNC ceased operation. But he's still selling the kit and apparently has found a replacement for it. Seems to me it would either be interchangeable or he's had to modify the brackets to fit the currently available slave cylinders.

[hogauto]

Thanks for the offer Garage guy but I was able to get a local place to CNC one . I agree that it was a strange response from Mike . I checked Speedway and the have a slave with the same measurement as mine.

[Garage Guy]

Glad to hear you were able to figure something out it's strange though I have a TKO 500 from Forte with the new kit and slave cylinder I bought it right when CNC shut down. Had no problem installing it.

Richard