jwhit
01-04-2020, 10:43 PM
just got my kit and starting to get things together have ?
my kit came with 2 wilwood 3/4 master clys but manual
states rear should be 5/8 and front should be 3/4 .
should i get a 3/4 swapped out for 5/8??
Logan
01-04-2020, 11:37 PM
Factory Five used to supply their kits with one of each. One 5/8” and one 3/4” master cylinder. They no longer do this however, as sometime in the past year or two they began supplying a pair of 3/4” master cylinders. The manual is still outdated and reflects the older setup.
As for what you need, with the brakes most folks are using nowadays the 3/4” will work just fine. Don’t forget, you still have quite a bit of adjustment using the balance bar built into the Wilwood pedal assembly. So even with both master cylinders being 3/4”, you can still fine tune the brake bias.