Switches

[Higgybulin]

Having trouble finishing up my dash, anyone have these that they didn't use?
(1) DPDT (for hazards)
(1) DPST (for low/high beam)
Or even post pics of the back sides of the switches(hazard) maybe Im wiring the one I have wrong. I bought a dash from a forum member, maybe the switches were labelled wrong.
Thanks.
Higgy

[Papa]

The hazzard switch is a 6-pin switch. You'll only use one of the ends of the switch. Run the two power wires to the two center pins and then the left and right wires to the two pins on the same end of the switch.

[Higgybulin]

The hazzard switch is a 6-pin on-off-on switch. You'll only use one of the ends of the switch. Run the two power wires to the two center pins and then the left and right wires to the two pins on the same end of the switch.

Score one for Papa Dave!! Hazards now operational(no need for that switch in OP now)