View Full Version : Just finished this beauty.
michael everson
12-27-2019, 07:13 AM
https://live.staticflickr.com/65535/49280457693_2bc016e50e_k.jpg
https://live.staticflickr.com/65535/49280458023_ac230b5a21_k.jpg
https://live.staticflickr.com/65535/49281142487_20c9f777b2_k.jpg
https://live.staticflickr.com/65535/49281142182_9bf84dfd85_k.jpg
Just finished this with a local customer. We picked up the kit on august 11 and finished it last week. Its a coyote power car with a 6 speed all from Factory five.
Mike
wallace18
12-27-2019, 07:20 AM
Super job as always Mike!
mike223
12-27-2019, 07:38 AM
Beautiful!
Just curious what the GTO vents feed?
ydousurf
12-27-2019, 08:39 AM
Yeah, that is sweet looking, Mike! And I too am curious about those vents? No doubt one can say it's unique, but I dig it!
Dj
FFinisher
12-27-2019, 09:41 AM
Looks great Mike.
Jim Wehr
12-27-2019, 03:46 PM
Looks great! Love the silver.
Boydster
12-27-2019, 04:14 PM
Thats a good lookin Roadster.
mlewis
12-27-2019, 04:57 PM
Nice looking build.
I like the color scheme
How about some pics of the engine, interior, etc...
Jryasko
12-27-2019, 05:43 PM
Very nice Mike. It looks like that has the vinyl dash option, can you share how you attached the top to the hoop. Thanks
Looks great, what silver is it?
chargerbill
12-27-2019, 10:17 PM
Just wow!
michael everson
12-28-2019, 06:40 AM
Its a Sherwin Williams color. I will get the code.
The vinyl dash is held up by the Russ Thompson turn signal on the driver side, and on the passenger side I install one screw through the glove box enclosure and into the 3/4 tube.
With the body off and the dash in place, it will be obvious where you can drill the hole to secure. I just drill down through both sides of the 3/4 tube and through the enclosure. Then open up the hole a bit in the enclosure and screw it in from inside the glove box with a stubby screw driver.
Mike