View Full Version : Clutch Release Lever Dust Boot for Ford M-6392-R58 bellhousing
Jeff's First FFR
12-13-2019, 05:45 PM
Hi all,
I have been looking all over for this dust boot for the Ford aluminum M-6392-R58 TREMEC TKO-600 bellhousing. It is a rectangular opening with the long axis same as car's long axis. All I can find are for a square opening.
Anyone know where I can find one?
Thanks,
Jeff
edwardb
12-13-2019, 06:54 PM
If you don't find one, don't panic. You really don't need it. Standard fare on DD's which are tested and driven in all kinds of environments. For our builds, often not used. Many times because the aftermarket bell housings (e.g. Quicktime) don't offer or have any provision for a cover. I had one of my first build. Haven't had one since. Thousands of miles over multiple seasons with no issues.
Jeff's First FFR
12-13-2019, 07:13 PM
Thanks, Paul
I guess I can get along without it, too.
BTW, how's the weather up there?
Jeff
edwardb
12-13-2019, 11:36 PM
Thanks, Paul
I guess I can get along without it, too.
BTW, how's the weather up there?
Jeff
Cold... It's Michigan. It's December. Any questions? :confused: Doesn't look like we're going to have a white Christmas. Oh well.
frankeeski
12-14-2019, 12:21 AM
Give Mike Forte a call.
Jeff's First FFR
12-14-2019, 07:42 AM
Will oo.
Cable or hydraulic clutch? Won’t work with an external slave hydraulic clutch without cutting half of it apart.
I bought one for my T5/fox bellhousing but it won’t work with my Forte’s hydraulic clutch kit.
It’s not like it seals things up, I don’t think it’s necessary.