35 Truck Headers

[RuffShod]

Has any body had any luck with non block hugger headers?

Was wanting to see what fit, due to the proximity of the chassis and the heads.

Thanks!

[wallace18]

What engine are you using?:confused:

[RuffShod]

350 sbc

[bnelson]

Has any body had any luck with non block hugger headers?

Was wanting to see what fit, due to the proximity of the chassis and the heads.

Thanks!

I used Sanderson CC16 for early Camaro/Firebird. They fit perfect but they are huggers. I couldn't get anything else to work the way I wanted. They give you plenty of room for the wiring and steering on the drivers side and lots of room for the starter and AC/heater hoses on passenger side. I used a mini starter so a ton of room and easy to get to. Plug access is another story :(

[RuffShod]

I was wanting headers to exit the engine compartment between the front tire and the door and use collector muffs.

Kinda like IMCA Modified headers or gasser headers.

[RuffShod]

I used Sanderson CC16 for early Camaro/Firebird. They fit perfect but they are huggers. I couldn't get anything else to work the way I wanted. They give you plenty of room for the wiring and steering on the drivers side and lots of room for the starter and AC/heater hoses on passenger side. I used a mini starter so a ton of room and easy to get to. Plug access is another story :(

I will go with these if I cant find what I am looking for.

Thanks!

[bnelson]

I will go with these if I cant find what I am looking for.

Thanks!

No problem. If pictures on specific angles would help let me know. I know its kind of a guessing game till you get parts and are able to try them out.

[RuffShod]

Just found these. If they don't fit...I can make them fit.


https://www.daymotorsports.com/schoenfeld-modified-headers-adjustable


Part#:SCH-161-38