Panhard bar frame rubs pinion yoke

[DaveT01]

When my rear suspension unloads prior to full droop my pinion yoke hits my panhard bar frame. It rubs with the car on jacks and more importantly once in a while over larger bumps at highway speeds. Has anyone run into this and how was it corrected. Has anyone refabricated the panhard bar frame. I have a 3 link set up 8.8 rear and my pinion angle is properly set. Any help/input would be greatly appreciated.

[wallace18]

Check your ride height. Should be a minimum 4.5" frame to ground.

[DaveT01]

My ride height is set at 5” frt and 5.5” rear and my tires are approx 25.5” tall all the way around. I should have mentioned before that I have QA1 shocks.