View Full Version : rear spring perch
racecartom
09-06-2011, 05:12 PM
Can someone provide a picture of the installed rear perch used with the cut rear donor spring. Not sure how far up the perch I 'thread the sping' over the perch.
please advise and tahnks..............RCT
bil1024
09-06-2011, 06:34 PM
Thread it most of the way, you will change the height later when you adjust to the 4.75 inches
This is what I started with but I adjusted it after I got it built and on the ground. I drilled holes in the spring perch and treaded a hose clamp thru the holes to make sure the spring did not move.
http://i17.photobucket.com/albums/b71/jpearl_/DVC00139.jpg